Retrofit Drip Emitters
DIG’s single and multi-outlet drip emitters are designed to easily convert sprinkler risers into efficient, water saving drip irrigation systems. All of DIG’s multi-outlet drip emitters and kits are designed to retrofit a 1/2″ sprinkler riser and to operate at the original sprinkler system’s operating pressure, delivering equal flow over a wide range of pressures. Replace your overhead sprinkler irrigation with low-volume, multi-outlet drip irrigation, and save a significant amount of water by improving irrigation efficiency and lowering water runoff. For even more savings, check with your city for drip irrigation rebate program eligibility.
R67 Adapts Micro Tubing Barb to 1/2″ Riser
The R67 1/2″ FNPT x 1/2″ MNPT Riser Adapter with a 1/4″ barbed side elbow outlet allows incorporation of 1/4″ micro tubing with drip fittings into an existing 1/2″ sprinkler riser, while still allowing full use of the sprinkler head. It allows a combination of drip emitters or other low-flow devices to be installed to the riser below the sprinkler, offering an easy alternative for watering baskets, containers and individual plants that were not covered by the original sprinkler head.
Features
- Provides a barbed outlet when mounted to any 1/2″ riser
- Simple option to retrofit a sprinkler riser to a drip irrigation system
- Constructed of UV-resistant, durable plastic material to withstand the most adverse
Sprinkler Riser to Drip Conversion Kit
DIG’s 1/2” FPT X .700 compression tee Sprinkler Riser to Drip Conversion Kit (model DSR) is used to convert a 1/2” sprinkler riser into a low-flow drip irrigation zone. The DSR includes a 1/2” conversion adapter, a 25-PSI preset pressure regulator and a .700 OD swivel tee with a washer/filter to start a drip irrigation system for landscape plantings or lawn replacement from any 1/2” sprinkler riser. Constructed of ultraviolet-resistant, high-impact molded plastic, the conversion kit allows a 1/2” sprinkler riser to serve as the point of connection from the 1/2” riser to 1/2” dripline or drip tubing. The 25-PSI pressure regulator reduces the outgoing pressure, providing protection to the zone.
Features
- Converts a 1/2” male pipe thread riser to a two-way .700 OD compression connection
- Includes a 1/2” adapter, 25-PSI pressure regulator and swivel tee with washer/filter
- Use as a starting point to connect drip line or drip tubing into 1/2” riser
- Allows the start of a drip irrigation zone from any sprinkler riser
- Reduces incoming water pressure to the ideal working pressure for a drip system
- Simple and easy solution for starting a drip irrigation system
- Provides flexibility in converting a 1/2” riser into a drip irrigation zone in a few steps
- Secure and easy installation of drip line or drip tubing without glue or clamps
- The tee’s black insert fits all drip line or polyethylene drip tubing with .670 OD, .700 OD and .704 OD
- High-strength plastic construction with UV protection for durability and long life
R70 Converts a 1/2″ Riser Adapter to 10/32 Thread
The R70 converts a 1/2″ sprinkler riser to a micro sprayer, fogger or spray jet with 10/32″ thread.
- Inlet 1/2″ FNPT
AD5 Adjustable Full Circle Dripper on 1/2″ FNPT
DIG’s 360° Adjustable Stream Drip Emitter on 1/2″ female pipe thread is designed to produce a gentle stream pattern with an adjustable flow from 0 to 15.7 GPH and a diameter range from 0 to 2.7’ at 30 PSI. The emitter has an adjustable cap that allows for simultaneous control of the flow rate and the wetting area. It should be used in residential gardens for small-to-large pots, groundcovers, shrubs, trees and individual plants or groups of plants inside planter boxes. The adjustable emitter offers a convenient way to water areas where conventional sprinkler systems are not workable.
Features
- Click adjustment from flow off to full flow – perfect as the plant grows and its need for water changes
- Mount into an 1/2″ sprinkler riser
- Available in 360° patterns for individual plants or closely spaced plantings
- Rotation of the cap allows adjustment of flow and diameter of throw, down to a complete shut off via a ratchet mechanism on the cap and a notch on the base
- Efficient and reliable method for applying water
- Trouble-free operation with no moving parts
- Removable cap for easy cleaning
- Constructed of UV-resistant, durable plastic material
6-Outlet Drip Irrigation Manifold
DIG’s Six-Outlet PC Drip Emitter Manifold is a high-flow emission device used to retrofit an existing 1/2″ sprinkler riser into a six-outlet drip irrigation system without altering or increasing the flow of the sprinkler system zone. The manifold with 1/2″ female pipe thread is a pressure compensating head operating at a pressure range of 15-50 PSI with an even flow rate of 6 GPH per each outlet. It allows installation flexibility when incorporated into a new system or as a part of a sprinkler system zone. The manifold has six rotating barbed elbows outlets that can be connected to 1/4″ micro tubing to deliver water under the plant canopy, using stakes to support the micro tubing in place. It can also incorporate 1/4″ drip line, 1/4″ soaker hose or drip emitters to a maximum flow of 6 GPH to achieve good root zone coverage of individual plants or groups of plants.
Features
- Replacing the sprinkler riser with the six-outlet manifold can lead to water savings of 50% to 70%
- Can be used to water roses, shrubs, groundcover and trees
- Applies water directly to the plant root zone area, leading to less surface evaporation from leaves and soil
- Eliminates wet walls and discoloration and staining of fences and windows
- Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage
- No special tools or glue are needed
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Barbed elbow outlets allow installation flexibility
- Pressure compensating feature allows for equal flow rates from each outlet
- Install above grade, or place below grade in a 6″ emitter box
- Use with any 1/4″ micro tubing
6-Outlet Adjustable Drip Manifold
DIG’s Adjustable Six-Outlet PC Drip Manifold (1/2″ female pipe thread) is used to retrofit an existing 1/2” sprinkler riser into a six-outlet drip irrigation system without altering or increasing the total flow of the sprinkler system zone. It has six independently adjustable, pressure compensating outlets with flow rates between 0 and 20 GPH at operating pressures of up to 50 PSI. The manifold’s six rotating 1/4” barbed outlets have flow control knobs which offer installation flexibility when the unit is incorporated into a new system or when replacing any of the sprinkler heads in a zone. Each outlet accepts 1/4″ micro tubing, 1/4” soaker hose or the addition of drip emitters and adjustable stakes to bring water to each plant root zone at a maximum flow of 20 GPH per outlet.
Features
- Replacing the sprinkler riser with the six-outlet manifold can lead to water savings of 50% to 70%.
- Each outlet has a swivel barb with flow control knob that allows flow adjustment and installation flexibility
- Allows incorporation of 1/4” drip line, 1/4” soaker hose or the use of drip emitters to a maximum flow of 20 GPH per outlet
- Replacing a sprinkler head with drip irrigation can eliminate wet walls and discoloration and staining of fences and windows
- Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage
- No special tools or glue are needed
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Install above grade, or place below grade in a six-inch emitter box
- Use with any brand’s 1/4″ micro tubing
PC14100 PC1204 12-Outlet Drip Manifold Kits
DIG Maverick™ 12-Outlet Drip Kits are used to retrofit a 1/2” sprinkler riser into a 12-outlet drip irrigation system without altering the flow of the sprinkler system zone. Maverick™ 12-Outlet Drip Kits allow installation flexibility when incorporated into a new system with a considerable number of 12 -outlet manifolds on each line. The Maverick™ 12-Outlet Drip Kits utilize extremely accurate, 4 GPH, pressure compensating individual and interchangeable drip emitters to ensure equal flow from each outlet over a wide range of operating pressures from 10 to 80 PSI. Each kit contains a 12-outlet manifold with ½” FPT, twelve 4-GPH PC drip emitters, twelve stakes, eight caps, twelve bug plugs and twelve color-coded converter barbs to convert the 1/8” outlet into a 1/4” outlet for use with 1/4” micro tubing. Additionally, the PC14100 contains 100’ of 1/8” micro tubing.
Features
- Replacing the sprinkler riser with the 12-outlet manifold can lead to water savings of 50% to 70%
- Constructed with 12 individual, interchangeable pressure compensating drip emitters
- The self-flushing drip emitters utilize a floating silicon diaphragm that allows passage of small particles which otherwise could clog the drip emitter water passages
- Each drip emitter has a built-in filter
- Unused outlets may be plugged so that a minimum of 4 of the outlets to a maximum of 12 can operate at once
- Built with backup disc filter™ for easy cleaning
- Color-coded removable nozzles for easy replacement and for flow rate identification
- Can be used to water roses, shrubs, groundcover and trees
- Complete kit; all parts included
- Applies water directly to the plant root zone area, leading to less surface evaporation from leaves and soil
- Eliminates wet walls and discoloration and staining of fences and windows
- Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage
- No special tools or glue are needed
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Barbed elbow outlets allow installation flexibility
- Pressure compensating feature allows for equal flow rates from each outlet
- Install above grade, or place below grade in a 6″ emitter box
- Use with 1/8” and any ID 1/4″ micro tubing
R73 12″ PE Riser on 1/2″ MNPT
The Polyethylene Riser Assembly allows you to raise any micro sprayer with 10/32″ thread above the ground. The riser assembly can be used to retrofit any 1/2″ FNPT outlet.
A450 Four-Outlet Drip Manifold Kit
DIG’s Four-Outlet Drip Manifold Kit is a complete kit utilizing a four-outlet high flow emission device to retrofit an existing 1/2″ sprinkler riser into a four-outlet drip irrigation system without altering or increasing the flow of the sprinkler system zone. The four-outlet drip manifold with 1/2″ female pipe thread is a pressure compensating head operating at a pressure range of 10-50 PSI with an even flow rate of 6 GPH per each outlet. The kit allows installation flexibility when incorporated into a new system or as a part of a sprinkler system zone. The manifold has four barbed outlets and 50′ of 1/4″ micro tubing to deliver the water under the plant canopy and includes stakes to hold the micro tubing in place. It can also incorporate 1/4″ drip line or drip emitters with a maximum flow of 6 GPH to achieve good root zone coverage of individual plants or groups of plants.
Features
- Replacing the sprinkler riser with the four-outlet manifold can lead to water savings of 50% to 70%
- Built with backup screen filter
- Color coded
- Can be used to water roses, shrubs, groundcover and trees
- Complete kit; all parts included
- Applies water directly to the plant root zone area, leading to less surface evaporation from leaves and soil
- Eliminates wet walls and discoloration and staining of fences and windows
- Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage
- No special tools or glue are needed
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Barbed elbow outlets allow installation flexibility
- Pressure compensating feature allows for equal flow rates from each outlet
- Install above grade, or place below grade in a 6″ emitter box
- Use with any 1/4″ micro tubing
FREE PRICE QUOTE
Albert Montano Sand and Gravel
505-989-7921
LIKE US ON FACEBOOK!