Foggers & Misters
Foggers and misters are used for misting, humidifying and cooling applications, keeping plant foliage constantly moist, or when overhead fine mist watering is required. Available with barbs or threads, the foggers and misters have a very fine droplet size and very low flow rates. They are ideal for watering pots, baskets, containers and plants that needs constant moisture, indoors or outdoors.
Fogger/Mister on Barbed Elbow
DIG’s 360° Fogger/Mister with barbed elbow operates at a minimum pressure of 30 PSI to produce micro-sized droplets in a small diameter area when mounted above a plant. Higher incoming pressure results in smaller and finer droplets with finer mist. The 3-GPH mister’s vortex design spins the water flow into a fine mist, useful for plants needing constant moisture or wherever overhead cooling watering or humidifying is suggested. It is easy to position the mister and direct the water flow by attaching the fogger/mister to the micro tubing 5 to 15” above the plant canopy for full coverage.
Features
- Incorporates a vortex mechanism, breaking the water into micro-sized droplets
- Designed for easy installation and use
- Can be installed on top of 8” to 24” diameter pots and baskets or for overhead misting, cooling and watering
- Can be extended with 1/4″ micro tubing in any position
- Trouble-free operation with no moving parts
- Low flow with small droplets in 360° pattern at approximately 70° trajectory
- Three-part construction with an O-ring for a tight seal
- Available with a 1/4” barbed elbow or with 6” stabilizer spike
- Can be automated using a hose end timer
- Constructed of UV-resistant, durable plastic material
Fogger/Mister on Barb with Stake
DIG’s low-flow, 360° Fogger/Mister with a barbed elbow (also available on a stake) is ideal for misting or watering pots and hanging baskets. Operating at a pressure range of 30 to 60 PSI, the 3-GPH fogger/mister’s vortex design spins the water droplets into a fine mist, producing micro-sized droplets in a small-diameter area. It is available on a 6” stake with a 1/4″ barbed elbow (model 7790BB – pack of 2) or with a 1/4” barbed elbow and no spike (model 7795BB – pack of 5), allowing for installation flexibility with any size tubing. The fogger/mister can be placed inside 8” to 24” diameter pots and baskets or used where overhead watering or misting is suggested on any type of planting, including vegetation that requires constant moisture, with the mister hung upside down 4″ to 5” above the plant.
Features
- Incorporates a vortex mechanism, breaking the water into micro-sized droplets
- Designed for easy installation and uses and does not require skilled design experience
- Can be used with 8” to 24” diameter pots and baskets or for overhead cooling and watering
- Can be extended with 1/4″ micro tubing in upright or upside-down position
- Trouble-free operation with no moving parts
- Low flow with small droplets in 360° pattern at approximately 70° trajectory
- Three-part construction with an O-ring for a tight seal
- Includes 1/4” barbed elbow and available with a 6” stabilizer spike
- Can be operated automatically using a hose end timer
- Constructed of UV-resistant, durable plastic material
Fogger/Mister with Memory-Flex Tubing
DIG’s 360° Mister with Memory-Flex Tubing operates at a minimum pressure of 30 PSI to produce micro-sized droplets in a small diameter area when mounted above a plant. Higher incoming pressure results in smaller and finer droplets with finer mist. The 2-GPH mister’s vortex design spins the water flow into a fine mist, useful for plants needing constant moisture or wherever overhead watering is indicated. It is easy to position the mister and direct the water flow by adjusting the memory-flex tubing. The tubing retains the position you set, allowing for complete versatility. Position the mister vertically for overhead coverage.
Features
- Incorporates a vortex mechanism, breaking the water into micro-sized droplets
- Designed for easy installation and uses
- Can be used with 8” to 24” diameter pots and baskets or for overhead cooling and watering
- For cooling effect, install 8 to 12 feet above ground, 3 to 6 feet apart
- 12 in. memory-flex tubing with barbed connector for maximum flexibility
- Trouble-free operation with no moving parts
- Low flow with small droplets in 360° pattern at approximately 70° trajectory
- Three-part construction with an O-ring for a tight seal
- Can be operated automatically using a hose end timer
- Constructed of UV-resistant, durable plastic material
Note: At lower pressure than 30 PSI, the 360° Mister with Memory-Flex Tubing will not function
Mister on Threaded Barb
Spraying a fine mist over a diameter of up to 7.2′, DIG’s small-droplet-size, low-precipitation-rate Micro Mist Sprayers are used for residential gardens, greenhouses and nurseries to water large planter boxes and flowerbeds, or for seed germination. They are available with a full-circle spray pattern only and in one model, 7750BB (pack of 5). The micro sprayers incorporate a vortex mechanism, allowing low water flow through a large water passage for 360° of fine mist spray in a flat trajectory. They may be placed upright or hung upside down where overhead misting is required.
Features
- Available in a 360° flat pattern for flowerbeds, seedlings, greenhouses and nurseries
- Can be extended with 1/4″ micro tubing and can be used in an upright or upside-down position
- Efficient and reliable method to apply water in a fine-mist application
- Trouble-free operation with no moving parts
- Low flow with small droplet size in a fine mist with a 360° pattern
- Constructed of UV-resistant, durable plastic material
Low Flow Fogger/Mister
DIG low-flow, 360° Fogger/misters with ¼”. barb or 10/32 thread operate at a minimum pressure of 30 PSI to produce micro-sized droplets in a small diameter area when mounted above the plant. Higher incoming pressure results in smaller and finer droplet size. The .8 GPH fogger’s vortex design spins the incoming water into a fine mist, useful where overhead misting or cooling is desired, or for plants that require constant moisture. DIG Fogger/misters are ideal for misting and humidifying in pots, hanging baskets, and planters as well as hanging above for cooling effect. ¼” barb or 10/32 thread allows for a quick and easy connection to ¼” micro or 1/2” poly tubing. The fogger/misters are available in two models, part # 8825BB with a 1/4” barb (pack of 5), and part # 8810BB with 10/32 thread (pack of 5) allowing for installation flexibility with any size tubing.
Features
- Incorporates a vortex mechanism, spinning the incoming water into fine mist with micro-sized droplets
- Can be used for overhead cooling and humidifying, indoors or outdoors
- Can be extended with 1/4″ micro tubing in upright or upside-down position
- Efficient method to apply water with a very fine mist application
- Trouble-free operation with no moving parts
- Low flow with small droplets in a fine mist with a 360° pattern and approximately 70° trajectory
- Color-coded nozzles are easy to open, clean and replace
- Three-parts construction with O-ring for a tight seal
- Available with 1/4” barbed or 10⁄32 thread
- Constructed of UV-resistant, durable plastic material
FREE PRICE QUOTE
Albert Montano Sand and Gravel
505-989-7921
LIKE US ON FACEBOOK!