Drip & Micro Sprinklers Kits
Whether planting a vegetable garden, decorating a patio with flowery potted plants, maintaining a hill with shrubs, groundcovers or roses, adding new trees, or simply keeping flowerbeds hydrated and healthy, DIG offers a wide range of drip irrigation and micro sprinkler kits to suit every garden’s watering needs. Complete, adaptable and expandable, our drip irrigation watering kits are easy to install and make even the newest gardener feel like a pro. They are a good introduction to a low-volume drip irrigation system installation and a great way to start saving water. Containing all the necessary parts to get a drip irrigation project started from a faucet, 1/2″ riser, 3/4″ pipe, or from the end of a garden hose, DIG’s drip kits are a perfect fit for installing your own drip irrigation system.
SM500 Micro Sprayer Kit
DIG’s adjustable micro sprayer kit (model SM500) is a complete kit designed to water a garden of up to 500 sq ft and is ideal for flowerbeds, shrubs,
groundcovers, container beds, and under tree canopies. The kit has all the parts needed to install a system with eight adjustable micro sprayers starting from an outside hose faucet, and can be automated using one of DIG’s battery operated or solar powered controllers. It can accommodate expansion of up to 1000 sq ft by using additional 1/2″ drip tubing and micro sprayers for a total flow rate of up to 220 GPH.
Features
- Use to install a micro-sprayer system from a hose faucet
- Contains 46 pieces for a complete installation
- Simple to install, expand and customize; can cover up to 500 sq ft
- Includes adjustable micro sprayers in 360°, 180° and 90° coverage for small and large areas
- Offers gentle watering with low water usage leading to less plant stress and less water runoff
- Saves water when compared to a conventional sprinkler system
- No glue or tools required
- Use above ground; may be covered with mulch, if desired
- Operating pressure range of 25 to 30 PSI
G77AS Drip Kit
Perfect for first time user, the DIG G77AS Drip Irrigation Kit is a complete kit for irrigating groundcovers, shrubs, trees, flowers, roses, vegetable gardens and vines. The kit has all the parts needed to start a system from a faucet or a garden hose, and covers up to 150 sq. ft. This kit easily expands with DIG’s complete line of drip products to cover a larger area of up to 400 sq. ft. as more plants are added using additional drip tubing and PC drip emitters with the same flow rate. The kit includes a 3/4″ backflow preventer, 3/4″ 25 PSI pressure regulator, 3/4″ swivel adapter, 50′ of our premium 1/2″ drip tubing with .600 ID x .700 OD, 50′ of 1/4″ micro tubing, PC drip emitters with twenty 1-GPH, two .5-GPH, two 2-GPH and two 4-GPH PC drip emitters, and all the necessary parts needed to complete the installation.
Features
- Use to water roses, shrubs, groundcover, flowerbeds and trees; ideal for hillsides
- Complete kit; covers up to 150 sq ft (can be easily expanded up to 400 sq ft)
- Contains 26 PC button drip emitters with 20 1-GPH, two .5-GPH, two 2-GPH and two 4-GPH drip emitters
- Applies water at a very low application rate leading to less surface evaporation from leaves and soil
- Offers flexibility in irrigation frequency and application rate, minimizing surface compacting and runoff
- Designed for new and existing landscapes including difficult terrain, such as slopes and oddly shaped areas
- No special tools or glue are needed
- Saves money by significantly lowering the cost of system components compared to conventional irrigation systems
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
GE200 Drip & Micro Sprinkler Kit
The GE200 Drip & Micro Sprinkler Kit is one of DIG’s bestselling drip irrigation kits, suitable for residential gardens planted with roses, shrubs, groundcovers, flowerbeds and trees. The kit can cover up to 700 sq. ft and can be expanded to cover more than 1000 sq. ft using additional drip tubing, micro sprayers and drip emitters. This kit contains all the parts needed to start a drip irrigation system from a faucet or a garden hose. The kit includes a 3/4″ backflow preventer, 3/4″ 25 PSI pressure regulator, 3/4″ swivel adapter, 200′ of premium 1/2″ drip tubing with .600 ID x .700 OD, 50′ of 1/4″ micro tubing, 11 micro sprayer assemblies with 13″ stakes and micro tubing with barbs, 20 1-GPH PC drip emitters and all the necessary parts needed to complete the installation.
Features
- Use to water roses, shrubs, groundcovers, flowerbeds and trees; ideal for hillsides
- Complete kit; covers up to 700 sq ft (can be easily expanded)
- Contains 11 micro sprayer assemblies, including three 360°, four 180° and four 90° patterns, and 20 1-GPH PC button drip emitters
- Applies water at a very low application rate reducing surface evaporation from leaves and soil
- Micro sprayers are useful as water remains in the upper soil layers where the roots are developing
- Easy to install
- Provides flexibility in irrigation frequency and low application rate minimizes soil compaction and surface runoff
- Designed for new and existing landscapes, including difficult terrain such as slopes and oddly shaped areas
- No special tools or glue are needed
- Save money by significantly lowering the cost of system components compared to conventional irrigation systems
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check with local water provider)
ML50 Raised Bed Drip Kit
DIG ML50 Raised Bed Drip Kit is specially designed to water planter boxes or vegetable gardens planted in rows. The kit contains 50’ of 1/4” dripline with .52 GPH @ 15 PSI or .65 GPH @ 25 PSI drip emitters every 9”, providing up to five lines, with each line up to 10′ long (up to 150 sq. ft). The kit can be expanded to cover more than 700 sq. ft. using up to five kits together or expanding the kit using additional 1/2” drip tubing as the supply line, along with additional 1/4” drip line. The kit includes a 3/4″ backflow preventer, 3/4″ 25 PSI pressure regulator, 3/4″ swivel adapter, 50′ of our premium 1/2″ drip tubing with .600 ID x .700 OD and all the necessary parts to complete the installation.
Features
- Perfect for planter boxes or vegetable garden in-ground installations
- Complete kit; covers up to 150 sq ft (can be easily expanded)
- Contains 50′ of 1/4″ drip line with .52 GPH pre inserted drip emitters every 9″
- Applies water at a very low application rate leading to less surface evaporation from leaves and soil
- Offers flexibility in irrigation frequency and application rate, minimizing surface compacting and runoff
- Designed for row plantings, or plants in close spacing of any type
- No special tools or glue are needed
- Saves money by significantly lowering the cost of system components compared to conventional irrigation systems
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes).
FM01AS Patio Drip Watering Kit
DIG FM01AS Patio Drip Watering Kit is a complete kit with pressure compensating (PC) drip emitters to water up to ten hanging baskets, pots or containers decorating a patio or pool area. The Patio Drip Irrigation Watering Kit contains all the parts to start a system from a faucet or a garden hose and can be expanded to cover up to fifteen small-to-medium-sized hanging baskets or pots using additional micro tubing and PC drip emitters with the same flow rate. The kit includes a 3/4″ backflow preventer, ¾” 25 PSI preset pressure regulator, 3/4″ FHT x 1/4″ compression adapter, 60′ of 1/4″ micro tubing, ten PC drip emitters, 1/4″ tees and all necessary parts to complete the installation.
Features
- Use to water hanging baskets, pots or containers in or around a patio or a pool area
- Contains 10 1-GPH PC button drip emitters for up to 10 pots or baskets
- Applies water at a low application rate leading to less surface evaporation from leaves and soil
- Offers flexibility in watering frequency and application rate, minimizing surface compacting and runoff
- No special tools or glue are needed
- Saves money by significantly lowering the cost of system
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Ease of watering with lower water use and less water waste
GD50 PC Dripline Watering Kit
DIG GD50 Dripline Watering Kit is one of the easiest drip irrigation systems to install. Simply lay out the dripline and connect it to your water source. The dripline kit includes 50′ of dripline with sophisticated cylindrical pre-inserted 1 GPH pressure compensating (PC) drippers every 18″ for quick and easy installation, starting it from a 1/2″ sprinkler riser. The drip kit is ideal for narrow plantings, roses, flowerbeds and groundcover. Each dripper is pressure compensating between 10 and 45 PSI, assuring excellent flow uniformity and providing a consistent flow throughout the length of the line.
Features
- Complete kit; covers up to 150 sq ft (can be easily expanded up to 600 sq ft)
- Using drip irrigation, water is delivered directly to plant roots, resulting in less water loss to evaporation and wind
- Drip irrigation promotes healthy plant growth by maintaining optimum moisture levels in the soil and delivers water only where needed
- Used above grade and can be covered with mulch
- Pressure compensating drippers provide consistent flow over the length of the dripline
- Easily expanded and customized
- Can be used around building foundations to maintain moisture in heavy soils and prevent slab damage
- Can be connected into a 1/2″ sprinkler riser or faucet
- Offers flexibility in irrigation frequency and minimizes soil erosion and surface runoff
GRWKIT-12 Home Grow Drip Kit
DIG’s GRWKIT-12 Home Grow Drip Kit can be used to grow up to 12 potted plants with any medium in small to large spaces, indoor or outdoor. The kit includes a 12-outlet manifold, micro tubing to extend the emitters to the plants, and 12, 1-GPH PC drip emitters with a check valve. When the water is shut off, the drip emitters stop dripping as pressure drops below 2.2 PSI, leading to less water waste and nutrient runoff. This concept is the most simple and advanced design for starting a drip system retrofitting a 1/2″ sprinkler riser. DIG’s GRWKIT-12 Home Grow Kit may be used as an individual kit to cover up to 12 pots or incorporated into a system with a substantially greater number of pots to grow herbs, strawberries, cannabis, tomatoes and more.
The 12, 1-GPH pressure compensating drip emitters provide even uniformity from each outlet at a pressure of up to 45 PSI. The kit includes 12 stakes to secure the micro tubing with the drip emitter to each pot, 12 converter barbs to connect the 1/4” micro tubing to the manifold and 100’ of 1/4” micro tubing to complete the installation.
Features
- Grow up to 12 potted plants, including herbs, strawberries, tomatoes and many others
- Drip manifold is easily installed and can be opened to clean the mini disc filter inside
- Pressure regulated, self-flushing drip emitters with a built-in check valve attached at the end of the micro tubing stop dripping when water pressure drops below 2.2 PSI
- Drip emitters’ pressure compensating feature delivers consistent flow over a wide range of pressures and reduces lateral filling time to save water and fertilizer.
- Drip emitters’ self-activated flushing mechanism is designed to ensure continuous flushing of sediments and small particles for a better system operation over time.
- Composed of superior materials for a long life
- Can be installed in any position
- Unaffected by fluctuating inlet water pressure
- No special tools or glue are needed.
- Eight plugs provide a means of closing up to eight outlets.
- Includes flexible micro tubing for easy installation
- Can be automatically controlled with a small pump or with one of DIG’s timers utilizing two to four start times per day
DB250 Maintenance & Repair Expansion Bucket
The DIG DB250 Drip Irrigation Maintenance & Repair Expansion Bucket is fully loaded with 162 pieces of drip irrigation components used to repair, expand or maintain your drip irrigation system. It contains all the essential 1/4″ fittings, PC ddrip emitters, stakes and 1/4″ micro tubing to help keep your existing drip system maintained and operating at peak efficiency. All frequently used parts as well as a 1/4″ punch tool are included in the convenient, easy-to-carry bucket, which can also be used to store all of your drip parts in one place.
This kit features our versatile, color-coded, pressure-compensating drip emitters in three flow rates (1, 2, and 4 GPH) to efficiently repair, add to or modify your exiting drip system. The kit is economically priced well below the cost of the individual parts combined.
Features
- Replace or repair drippers, micro tubing and small sized connections
- Fully loaded with 162 pieces to repair, expand or maintain drip irrigation systems
- Forty pressure-compensating drippers in 1, 2 and 4 GPH
- No special tools or glue are needed
- Saves money by significantly lowering the cost of system components
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check with local water provider)
- Includes our free Drip Irrigation Guide for installing a drip system
PC14100 PC1204 12-Outlet Drip Manifold Kits
DIG Maverick™ 12-Outlet Drip Kits are used to retrofit a 1/2” sprinkler riser into a 12-outlet drip irrigation system without altering the flow of the sprinkler system zone. Maverick™ 12-Outlet Drip Kits allow installation flexibility when incorporated into a new system with a considerable number of 12 -outlet manifolds on each line. The Maverick™ 12-Outlet Drip Kits utilize extremely accurate, 4 GPH, pressure compensating individual and interchangeable drip emitters to ensure equal flow from each outlet over a wide range of operating pressures from 10 to 80 PSI. Each kit contains a 12-outlet manifold with ½” FPT, twelve 4-GPH PC drip emitters, twelve stakes, eight caps, twelve bug plugs and twelve color-coded converter barbs to convert the 1/8” outlet into a 1/4” outlet for use with 1/4” micro tubing. Additionally, the PC14100 contains 100’ of 1/8” micro tubing.
Features
- Replacing the sprinkler riser with the 12-outlet manifold can lead to water savings of 50% to 70%
- Constructed with 12 individual, interchangeable pressure compensating drip emitters
- The self-flushing drip emitters utilize a floating silicon diaphragm that allows passage of small particles which otherwise could clog the drip emitter water passages
- Each drip emitter has a built-in filter
- Unused outlets may be plugged so that a minimum of 4 of the outlets to a maximum of 12 can operate at once
- Built with backup disc filter™ for easy cleaning
- Color-coded removable nozzles for easy replacement and for flow rate identification
- Can be used to water roses, shrubs, groundcover and trees
- Complete kit; all parts included
- Applies water directly to the plant root zone area, leading to less surface evaporation from leaves and soil
- Eliminates wet walls and discoloration and staining of fences and windows
- Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage
- No special tools or glue are needed
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Barbed elbow outlets allow installation flexibility
- Pressure compensating feature allows for equal flow rates from each outlet
- Install above grade, or place below grade in a 6″ emitter box
- Use with 1/8” and any ID 1/4″ micro tubing
ST100AS Drip & Soak Tape Vegetable Watering Kit
DIG ST100AS Drip & Soaker Tape Vegetable Watering Kit is ideal for use on rows of fruits or vegetables such as beans, lettuce, strawberries, cucumbers, melons, tomatoes peppers, eggplants and many more. The kit’s watering tape is a flat, thin-walled tape containing pre-spaced .5 gallon per hour (GPH) @ 25 PSI In-line drip emitters welded into the drip soaker tape every 12”. The tape expands when filled with water and allows for complete saturation coverage along the line. The kit includes a 3/4” backflow preventer, flow control, 3/4” swivel adapter, 5’ of our premium 1/2” drip tubing with .600 ID x .700 OD, 100′ of drip tape with pre-inserted drip emitters every 12”, five connectors to start five rows, five end connectors and all other parts needed to complete or extend the system.
The drip soaker tape requires special fittings, available in a number of configurations, for exclusive use with the drip soaker tape.
Features:
- Simple to install
- Ideal for use on rows of vegetables and fruits, such as blueberries, strawberries, cucumbers, melons, boysenberries, raspberries and many more
- High-quality-extruded thin-wall pipe profile with pre-inserted drip emitters every 12”
- Can operate under extreme weather and field conditions
- Applies water to the plant roots at a low application rate leading to less surface evaporation from leaves and soil
- Offers flexibility in watering frequency and application rate, minimizing surface compacting and runoff
- The drip emitters’ turbulent flow path design with larger internal water passage offers higher resistance to clogging
- No special tools or glue are needed
- Saves money by significantly lowering the cost of system
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Provides ease of watering with lower water use and less water waste
- FREE BONUS BOOKLET! “How to Plan a Vegetable Garden”
A450 Four-Outlet Drip Manifold Kit
DIG’s Four-Outlet Drip Manifold Kit is a complete kit utilizing a four-outlet high flow emission device to retrofit an existing 1/2″ sprinkler riser into a four-outlet drip irrigation system without altering or increasing the flow of the sprinkler system zone. The four-outlet drip manifold with 1/2″ female pipe thread is a pressure compensating head operating at a pressure range of 10-50 PSI with an even flow rate of 6 GPH per each outlet. The kit allows installation flexibility when incorporated into a new system or as a part of a sprinkler system zone. The manifold has four barbed outlets and 50′ of 1/4″ micro tubing to deliver the water under the plant canopy and includes stakes to hold the micro tubing in place. It can also incorporate 1/4″ drip line or drip emitters with a maximum flow of 6 GPH to achieve good root zone coverage of individual plants or groups of plants.
Features
- Replacing the sprinkler riser with the four-outlet manifold can lead to water savings of 50% to 70%
- Built with backup screen filter
- Color coded
- Can be used to water roses, shrubs, groundcover and trees
- Complete kit; all parts included
- Applies water directly to the plant root zone area, leading to less surface evaporation from leaves and soil
- Eliminates wet walls and discoloration and staining of fences and windows
- Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage
- No special tools or glue are needed
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Barbed elbow outlets allow installation flexibility
- Pressure compensating feature allows for equal flow rates from each outlet
- Install above grade, or place below grade in a 6″ emitter box
- Use with any 1/4″ micro tubing
FREE PRICE QUOTE
Albert Montano Sand and Gravel
505-989-7921
LIKE US ON FACEBOOK!