Drip Irrigation Tubing
Extruded from premium polyethylene resin, DIG’s drip irrigation tubing and micro tubing are designed to meet every demand of a low volume drip irrigation system, from agricultural installations to backyard gardens. The drip tubing is used as the primary supply line in the installation of drip irrigation system, into which micro tubing, drip emitters, drip line or micro sprinklers are attached to deliver water to the plant areas. The drip tubing and micro tubing are manufactured with Dow 7510 linear low-density polyethylene resins and are resistant to cracking, heat, ultraviolet stress and chemicals.
DIG’s 1/4″ micro tubing comes in either vinyl or polyethylene material and is used primarily to extend drip emitters and micro sprinklers from the poly drip tubing to the plant; it can also be used as the main line in small drip irrigation systems. 1/8″ vinyl micro tubing is used with the Maverick™ 12-outlet drip manifold and our line of PC-CV single outlet drip emitters.
1/2″ (.710 OD) Poly Drip Tubing
DIG’s premium quality 1/2″ (.620 ID X .710 OD) poly drip tubing is available in lengths of 100′ and 500′. The .710 OD drip tubing has a leaner wall thickness of .45 wall and used with DIG and other blue insert compression fittings and DIG Nut lock™ fittings. The poly drip tubing, commonly referred to as drip irrigation tubing, blank tubing, distribution tubing. PE tubing or drip hose, is used as the primary drip irrigation installation supply line, into which micro tubing, drip emitters, drip line or micro sprinklers are attached to deliver water to the plant areas. DIG’s durable drip irrigation tubing is made with Dow 7510, low-density polyethylene resin material with a minimum of 2%+ Carbon Black for extra resistance to the damaging effects of ultraviolet rays. DIG poly drip tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength to meet every demand of drip irrigation system installations above or below grade.
Features
- Available 100′, and 500′
- Contains a minimum of 2% concentrated carbon black resin antioxidant to protect the poly drip tubing from thermal degradation
- The poly drip tubing made with Dow 7510 polyethylene resin exhibits a combination of outstanding environmental stress-cracking resistance and burst strength
- Use with our wide range of our blue compression fittings with .710 OD
- The poly drip tubing can meet any demand for above and below grade micro irrigation systems for gardening, landscape and agricultural installations
- Can be used with other manufacturers’ brands of the same size of outside dimeter tubing
- DIG poly drip tubing and micro tubing are made in the USA
1/4″ Poly Micro Tubing
DIG’s 1/4 in. (.170 ID x .250 OD) polyethylene micro tubing is used in the installation of a drip irrigation system. It can be used either to extend drip emitters and micro-sprinklers from the ½” or ¾” polyethylene drip tubing to the plant areas, as extensions from the 4, 6 and 12-outlet drip manifolds or as the basis of a small patio system using ¼” barbed fittings. DIG’s versatile 1/4″ polyethylene micro tubing is available in black only and in coil lengths of 50′, 100′, 500′ and 1000′. This commercial-grade poly micro tubing is made of high quality, linear low-density polyethylene resin. The micro tubing is manufactured with an antioxidant and contains a minimum of 2% concentrated carbon black to protect the finished product from thermal degradation.
Features
- Use to extend the drip emitters to plants
- Available in 50′, 100’, 500′ and 1000′ coils
- Contains a minimum of 2% concentrated Carbon Black resin antioxidant to protect the drip tubing from thermal degradation
- The polyethylene micro tubing exhibits outstanding environmental stress-cracking resistance and burst strength
- Use with DIG’s and others’ 1/4″ barbed fittings
- Meets the demand of micro irrigation systems for above or below the ground layouts in agricultural, landscape and residential gardening installations
- Interchangeable with other manufacturers’ brands of the same OD size tubing
- Available in black color only.
1/8″ Vinyl Micro Tubing
DIG’s 1/8″ commercial-grade Vinyl Micro Tubing (.118 ID x .187 OD) is available in black and in a coil length of 50′. Made of high-quality vinyl, the micro tubing is flexible and relatively soft. It is manufactured with an antioxidant and contains a minimum of 2% concentrated Carbon Black to protect the finished product from thermal degradation. The micro tubing is primarily used as the feeder line to the plant location from a drip emitter outlet or from a Maverick 12-outlet drip manifold.
Features
- Available in 50′ and 100′ coils
- Contains a minimum of 2% concentrated Carbon Black and an antioxidant to protect the drip tubing from thermal degradation
- Used to extend from the Maverick 12-outlet drip manifold to the plant location
- Softer, more flexible and easier to use than poly micro tubing
- Meets the demands of micro irrigation systems for above- or below-ground layouts in landscape and residential gardening installations
- Interchangeable with other manufacturers’ brands of the same-OD-size micro tubing
1/4″ Vinyl Micro Tubing
DIG’s 1/4″ (.156 ID x .245 OD) commercial-grade Vinyl Micro Tubing is available in black or brown and in coil lengths of 50′, 100′ and 500′. Made of high quality vinyl, the micro tubing is flexible and relatively soft. It is manufactured with an antioxidant and contains a minimum of 2% concentrated Carbon Black to protect the finished product from thermal degradation. The vinyl micro tubing is used in a wide range of drip irrigation applications, including as feeder lines from the 1/2″ drip tubing to extend drip emitters or micro sprinklers to the plants, as extensions from the 4-, 6- and 12-outlet drip manifolds or as the supply line for a complete 1/4″ drip system.
Features
- Available in 50′, 100’ and 500′ coils
- Contains a minimum of 2% concentrated Carbon Black and an antioxidant to protect the drip tubing from thermal degradation
- Use with 1/4″ barbed fittings
- Softer, more flexible and easier to use than poly micro tubing
- Meets the demand of micro irrigation systems for above- or below-ground layouts in agricultural, landscape and residential gardening installations
- Interchangeable with other manufacturers’ brands of the same OD size micro tubing
- Available in black or brown colors
1/2″ (.700 OD) Poly Drip Tubing
DIG’s premium quality 1/2″ (.600 ID X .700 OD) poly drip tubing is available in lengths of 50′, 100′, 200′, 500′ and 1000′. The poly drip tubing, commonly referred to as drip irrigation tubing, blank tubing, distribution tubing. PE tubing or drip hose, is used as the primary drip irrigation installation supply line, into which micro tubing, drip emitters, drip line or micro sprinklers are attached to deliver water to the plant areas. DIG’s durable drip irrigation tubing is made with low-density polyethylene resin material with a minimum of 2%+ Carbon Black for extra resistance to the damaging effects of ultraviolet rays. DIG poly drip tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength to meet every demand of drip irrigation system installations above or below grade.
Features
- Available in 2′, 50′, 100′, 200′, 500′, and 1000′
- Contains a minimum of 2% concentrated carbon black resin antioxidant to protect the poly drip tubing from thermal degradation
- The poly drip tubing made with premium low density polyethylene resin exhibits a combination of outstanding environmental stress-cracking resistance and burst strength
- Use with our wide range of 1/2″ compression fittings with .700 OD
- The poly drip tubing can meet any demand for above and below grade micro irrigation systems for gardening, landscape and agricultural installations
- Can be used with other manufacturers’ brands of the same size of outside diameter tubing
- Available in black color
- DIG poly drip tubing and micro tubing are made in the USA
1/2″ (.700 OD) Poly Drip Tubing (Brown)
Brown drip tubing, commonly referred to as poly tubing, blank tubing, or drip hose, is used as the primary supply line of a drip irrigation system into which drip line, micro line or drip emitters are connected to deliver water to the plant area. Made with premium quality polyethylene resins, DIG’s 0.700″ OD brown drip irrigation blank poly tubing is designed to meet the demands of any drip irrigation project, above or below ground, from residential gardening to commercial landscape and agricultural installations. Brown poly tubing has outstanding environmental stress-cracking resistance, high burst strength and UV protection for durability and long life. It is available in coils of 100′ and 500′.
Features
- Produced with Dow’s 7510 linear low-density polyethylene resins with high environmental stress crack resistance and UV protection against the damaging effects of ultraviolet rays
- Color: Brown
- Use with DIG’s black compression fittings, 17 mm barbed fittings and Nut Lock™ fittings
- Dimensions: 100 ft. with .600 ID x .700 OD
- Bending radius: 1 foot
- Maximum operating pressure: 60 psi
- Can be installed above or below ground
- DIG’s drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
- Maximum recommended flow rate per each length of drip tubing is not to exceed 220 GPH (3.6 GPM)
- Made in Vista, CA, USA
FREE PRICE QUOTE
Albert Montano Sand and Gravel
505-989-7921
LIKE US ON FACEBOOK!