Drip Fittings
DIG’s drip irrigation fittings are available in a variety of sizes and configurations for both home gardeners and professionals. The compression fittings are used with the 1/2″ drip tubing and the barbed fittings are used with the 1/2” or 1/4″ drip tubing or micro tubing. The compression fittings are installed by pushing the drip tubing into the fitting while moving your wrist back and forth; the drip tubing is “walked” into the compression fittings for a very tight fit with no tools, glue, or clamps required. The barbed irrigation fittings are pushed into the drip tubing or micro tubing to ensure a leak-proof fit. DIG provides additional types of drip irrigation fittings with various configurations and uses.
Automatic Flush valve with .700 OD compression
The Automatic Flush Valve with a .700 OD compression connection inlet is use for periodic flushing of the drip tubing or drip line at the start and end of each irrigation cycle. At the start and end of each irrigation cycle, small amount of water passes through the tubing, flushing debris that have accumulated out the end. The compression side of the Automatic Flush Valve is attached to the drip tubing with a simple wrist action, the drip tubing is forced in for a very tight fit with no tools, glue or clamps required.
Features
- Helps to keep drip lateral free of debris and to ensure optimum system operation
- Eliminates periodic manual flushing.
- Automatically flushes the lateral at the beginning and end of each irrigation cycle
- Large water passage for reliable operation
- Secure and easy installation without glue or clamps
- Cycle flushing can reduce sediment build-up in the drip tubing, drip line or drip emitters, extending the long-term performance of the irrigation system.
- Opens at a very low pressure of approximately 1 to 2 PSI
- Can be removed for cleaning
- Professional-grade construction for long life and trouble-free operation
- Color-coded black insert fits all polyethylene drip tubing with .700 OD to .704 OD
- Made with high-impact, UV-resistant plastic
1/4″ Barbed Fittings
DIG’s 1/4” Barbed Drip Fittings are used in the installation of all brands of 1/4” micro tubing, 1/4″ drip line and 1/4″ soaker hose (.140 ID to .170 ID). The fittings are pushed into the inside of the tubing for a very tight-fit connection. They can be used for a two-way layout or for a three-way layout of the different tubing. The fittings can also be used to attach the micro tubing to 1/2” or 3/4” drip tubing. They are made of high-impact plastic and have the largest inside diameter in the industry with a higher flow rate capability and lower head loss.
Features
- Sharp-barb design for secure and tight-fit installation without glue or clamps
- Fits all brands of 1/4” micro tubing , 1/4″ drip line and 1/4″ soaker hose with .140 ID to .170 ID
- One-piece construction
- Made of high-impact, high-strength, UV-resistant plastic for durability and long life
- Large inside diameter for maximum flow
3/4″ Swivel Compression Fittings
Constructed of molded ultraviolet-resistant, high-impact plastic, DIG’s Swivel Compression Fittings with 3/4″ female threads are used to start a drip irrigation system and connect the drip tubing or micro tubing to the water source. They are available with a 3/4″ female hose thread or 3/4″ pipe thread inlet and include a 60-mesh screen washer. The fittings are installed by gardeners and professionals, and are available in two sizes and three configurations to start any type of drip irrigation system. Use the .700 OD compression fittings with black inserts for 1/2″ .700 OD drip tubing and the .250 OD compression fittings for 1/4″ micro tubing. The compression fittings use a simple wrist action; the polyethylene drip tubing or micro tubing is “walked” into the compression side of the fittings for a very tight fit with no tools, glues or clamps required.
Features
- Available with 3/4″ FHT or FPT and a 60-mesh stainless steel screen
- Made with high-impact, UV-resistant plastic
- Secure and easy installation without glue or clamps
- Black 1/2″ insert fits all polyethylene drip tubing with .690 OD, .700 OD and .710 OD, and Brown PC™ drip line;
- Black 1/4″ insert fits all micro tubing with .250 to .270 OD
Drip Soaker Tape Fittings
DIG’s Drip Soaker Tape Fittings are available in many configurations to meet all types of applications in the layout and installation of drip tape. They use a threaded sleeve assembly over a body with a large barb for easy installation. The larger threaded sleeve makes the fittings easier to install and tighten, and the sealing interface with a long barb provides guides for the drip tape to slide over the barb for a secure seal. The fittings are made of high-impact, UV-resistant plastic so they last for many years and work exceptionally well with all major brands of drip tape.
Features
- Fits all brand name 5/8” or 15 to 17 mil drip tape
- Made from high-strength, UV- and chemical-resistant plastic, containing 2% carbon black
- Secure and easy installation without glues or clamps
- Larger inverted threaded sleeves for easy and fast installation
Universal Nut Lock™ Fittings
DIG’s Universal Nut Lock™ Drip Fittings are used to connect drip tubing and drip line with dimensions from 1/2” to 5/8” or .620 OD to .710 OD. They can be used to connect two different sizes of drip tubing, providing a simple solution when there is no clear information about the drip tubing or drip line size used.
Used by both home gardeners and professionals, the Universal Nut Lock™ Drip Fittings are made of high-impact plastic for the connection of various sized drip irrigation tubing and drip line. Using a double barb, two pieces of drip line or drip tubing can be connected by inserting the fitting nuts over the drip tubing or drip line, then pushing the drip tubing or drip line over the barbed sides of the fitting, and finally threading the nuts over the drip tubing or drip line for a very tight grip.
Features
- Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions
- Fits .620 OD, .700 OD and .710 OD drip tubing, and drip line (16 mm and 17 mm)
- Three-part construction including a threaded nut, barb assembly and housing with male thread
- Threaded nut for easy assembly
- Available in four different configurations including coupling, tee, elbow and swivel tee
- Resistant to common fertilizers used in residential and commercial applications
.450″ OD to .710″ OD Compression Fittings
Constructed of molded ultraviolet-resistant, high-impact plastic, DIG’s Compression Fittings are available to fit most sizes of polyethylene drip tubing and drip line from 1/2″ to 5/8″ in any drip irrigation installation. They are available in a variety of sizes and configurations with home gardeners and professionals using .700 OD compression fittings (black inserts) for 1/2″, .700 OD drip tubing, and .710 OD compression fittings (blue inserts) for 1/2″ .700 OD drip tubing and TORO®’s .710 OD blue strip drip tubing. The compression fittings use a simple wrist action; the polyethylene drip tubing is “walked” into the fittings for a very tight fit with no tools, glues or clamps required.
Features
- Color coded
- Made with high-impact UV-resistant plastic
- Secure and easy installation without glue or clamps
- Black insert fits all polyethylene drip tubing with .690 OD, .700 OD and .704 OD, and Brown PC™ drip line; blue insert fits drip tubing with .710 OD
17 MM Barbed Fittings
The brown 1/2” Barbed Drip Fittings are used in the installation of DIG’s brown PC™ drip line and drip tubing with .570 to .600 ID. Used by home gardeners and professional alike, the brown fittings are made of high-impact plastic, and are available in a variety of configurations. Using a double barb, two pieces of drip line or drip tubing may be pushed over the barbed sides of the fittings for a very tight fit.
Features
- Made of high-impact, high-strength, UV-resistant plastic for extended operation in harsh conditions
- Available in a variety of configurations
- Extra sharp barbed design for secure and easy installation of ½” and 17 mm drip tubing, emitter tubing and brown PC drip line without glue or clamps
- One-piece construction for added strength and durability for a long-term performance
- No special tools, clamps or glue are needed
- Used with DIG Brown PC or any brand of ½” drip line and polyethylene drip tubing with .570 to .600 ID
- Made of high impact, high strength, durable and UV resistant plastic for long-life operation even in harsh conditions
FREE PRICE QUOTE
Albert Montano Sand and Gravel
505-989-7921
LIKE US ON FACEBOOK!